Introduction

A “LAMP” stack is a group of open-source software that is typically installed together to enable a server to host dynamic websites and web apps. This term is actually an acronym which represents the Linux operating system, with the Apache web server. The site data is stored in a MySQL database, and dynamic content is processed by PHP.

In this guide, we will install a LAMP stack on an Ubuntu 18.04 server.

Step 1 — Installing Apache and Updating the Firewall

The Apache web server is among the most popular web servers in the world. It’s well-documented and has been in wide use for much of the history of the web, which makes it a great default choice for hosting a website.

Install Apache using Ubuntu’s package manager, apt:

• sudo apt update
• sudo apt install apache2

Adjust the Firewall to Allow Web Traffic

Next, assuming that you have followed the initial server setup instructions and enabled the UFW firewall, make sure that your firewall allows HTTP and HTTPS traffic. You can check that UFW has an application profile for Apache like so:

• sudo ufw app list

Available applications:
  Apache
  Apache Full
  Apache Secure
  OpenSSH

If you look at the Apache Full profile, it should show that it enables traffic to ports 80 and 443:

• sudo ufw app info “Apache Full”

Profile: Apache Full
Title: Web Server (HTTP,HTTPS)
Description: Apache v2 is the next generation of the omnipresent Apache web
server.

Ports:
  80,443/tcp

Allow incoming HTTP and HTTPS traffic for this profile:

• sudo ufw allow in “Apache Full”

http://your_server_ip

How To Find your Server’s Public IP Address

• ip addr show eth0 | grep inet | awk ‘{ print $2; }’ | sed ‘s/\/.*$//’

• sudo apt install curl
• curl http://icanhazip.com

Step 2 — Installing MySQL

• sudo apt install mysql-server

• sudo mysql_secure_installation

This will ask if you want to configure the VALIDATE PASSWORD PLUGIN.

Note: Enabling this feature is something of a judgment call. If enabled, passwords which don’t match the specified criteria will be rejected by MySQL with an error. This will cause issues if you use a weak password in conjunction with software which automatically configures MySQL user credentials, such as the Ubuntu packages for phpMyAdmin. It is safe to leave validation disabled, but you should always use strong, unique passwords for database credentials.

Answer Y for yes, or anything else to continue without enabling.

VALIDATE PASSWORD PLUGIN can be used to test passwords
and improve security. It checks the strength of password
and allows the users to set only those passwords which are
secure enough. Would you like to setup VALIDATE PASSWORD plugin?

Press y|Y for Yes, any other key for No:

If you answer “yes”, you’ll be asked to select a level of password validation. Keep in mind that if you enter 2 for the strongest level, you will receive errors when attempting to set any password which does not contain numbers, upper and lowercase letters, and special characters, or which is based on common dictionary words.

There are three levels of password validation policy:

LOW    Length >= 8
MEDIUM Length >= 8, numeric, mixed case, and special characters
STRONG Length >= 8, numeric, mixed case, special characters and dictionary                  file

Please enter 0 = LOW, 1 = MEDIUM and 2 = STRONG: 1

Regardless of whether you chose to set up the VALIDATE PASSWORD PLUGIN, your server will next ask you to select and confirm a password for the MySQL root user. This is an administrative account in MySQL that has increased privileges. Think of it as being similar to the root account for the server itself (although the one you are configuring now is a MySQL-specific account). Make sure this is a strong, unique password, and do not leave it blank.

If you enabled password validation, you’ll be shown the password strength for the root password you just entered and your server will ask if you want to change that password. If you are happy with your current password, enter N for “no” at the prompt:

Using existing password for root.

Estimated strength of the password: 100
Change the password for root ? ((Press y|Y for Yes, any other key for No) : n

For the rest of the questions, press Y and hit the ENTER key at each prompt. This will remove some anonymous users and the test database, disable remote root logins, and load these new rules so that MySQL immediately respects the changes you have made.

Note that in Ubuntu systems running MySQL 5.7 (and later versions), the root MySQL user is set to authenticate using the auth_socket plugin by default rather than with a password. This allows for some greater security and usability in many cases, but it can also complicate things when you need to allow an external program (e.g., phpMyAdmin) to access the user.

If you prefer to use a password when connecting to MySQL as root, you will need to switch its authentication method from auth_socket to mysql_native_password. To do this, open up the MySQL prompt from your terminal:

• sudo mysql

Next, check which authentication method each of your MySQL user accounts use with the following command:

• SELECT user,authentication_string,plugin,host FROM mysql.user;

+------------------+-------------------------------------------+-----------------------+-----------+
| user             | authentication_string                     | plugin                | host      |
+------------------+-------------------------------------------+-----------------------+-----------+
| root             |                                           | auth_socket           | localhost |
| mysql.session    | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost |
| mysql.sys        | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost |
| debian-sys-maint | *CC744277A401A7D25BE1CA89AFF17BF607F876FF | mysql_native_password | localhost |
+------------------+-------------------------------------------+-----------------------+-----------+
4 rows in set (0.00 sec)

In this example, you can see that the root user does in fact authenticate using the auth_socketplugin. To configure the root account to authenticate with a password, run the following ALTER USER command. Be sure to change password to a strong password of your choosing:

• ALTER USER ‘root’@’localhost’ IDENTIFIED WITH mysql_native_password BY ‘password‘;

Then, run FLUSH PRIVILEGES which tells the server to reload the grant tables and put your new changes into effect:

• FLUSH PRIVILEGES;

Check the authentication methods employed by each of your users again to confirm that root no longer authenticates using the auth_socket plugin:

• SELECT user,authentication_string,plugin,host FROM mysql.user;

+------------------+-------------------------------------------+-----------------------+-----------+
| user             | authentication_string                     | plugin                | host      |
+------------------+-------------------------------------------+-----------------------+-----------+
| root             | *3636DACC8616D997782ADD0839F92C1571D6D78F | mysql_native_password | localhost |
| mysql.session    | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost |
| mysql.sys        | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost |
| debian-sys-maint | *CC744277A401A7D25BE1CA89AFF17BF607F876FF | mysql_native_password | localhost |
+------------------+-------------------------------------------+-----------------------+-----------+
4 rows in set (0.00 sec)

You can see in this example output that the root MySQL user now authenticates using a password. Once you confirm this on your own server, you can exit the MySQL shell:

• exit

At this point, your database system is now set up and you can move on to installing PHP, the final component of the LAMP stack.

Step 3 — Installing PHP

• sudo apt install php libapache2-mod-php php-mysql

In most cases, you will want to modify the way that Apache serves files when a directory is requested. Currently, if a user requests a directory from the server, Apache will first look for a file called index.html. We want to tell the web server to prefer PHP files over others, so make Apache look for an index.php file first.

To do this, type this command to open the dir.conf file in a text editor with root privileges:

• sudo nano /etc/apache2/mods-enabled/dir.conf

It will look like this:

<IfModule mod_dir.c>
    DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm
</IfModule>

Move the PHP index file (highlighted above) to the first position after the DirectoryIndexspecification, like this:

<IfModule mod_dir.c>
    DirectoryIndex index.php index.html index.cgi index.pl index.xhtml index.htm
</IfModule>

When you are finished, save and close the file by pressing CTRL+X. Confirm the save by typing Yand then hit ENTER to verify the file save location.

After this, restart the Apache web server in order for your changes to be recognized. Do this by typing this:

• sudo systemctl restart apache2

You can also check on the status of the apache2 service using systemctl:

• sudo systemctl status apache2

● apache2.service - LSB: Apache2 web server
   Loaded: loaded (/etc/init.d/apache2; bad; vendor preset: enabled)
  Drop-In: /lib/systemd/system/apache2.service.d
           └─apache2-systemd.conf
   Active: active (running) since Tue 2018-04-23 14:28:43 EDT; 45s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 13581 ExecStop=/etc/init.d/apache2 stop (code=exited, status=0/SUCCESS)
  Process: 13605 ExecStart=/etc/init.d/apache2 start (code=exited, status=0/SUCCESS)
    Tasks: 6 (limit: 512)
   CGroup: /system.slice/apache2.service
           ├─13623 /usr/sbin/apache2 -k start
           ├─13626 /usr/sbin/apache2 -k start
           ├─13627 /usr/sbin/apache2 -k start
           ├─13628 /usr/sbin/apache2 -k start
           ├─13629 /usr/sbin/apache2 -k start
           └─13630 /usr/sbin/apache2 -k start

Press Q to exit this status output.

To enhance the functionality of PHP, you have the option to install some additional modules. To see the available options for PHP modules and libraries, pipe the results of apt search into less, a pager which lets you scroll through the output of other commands:

• apt search php- | less

Use the arrow keys to scroll up and down, and press Q to quit.

The results are all optional components that you can install. It will give you a short description for each:

bandwidthd-pgsql/bionic 2.0.1+cvs20090917-10ubuntu1 amd64
  Tracks usage of TCP/IP and builds html files with graphs

bluefish/bionic 2.2.10-1 amd64
  advanced Gtk+ text editor for web and software development

cacti/bionic 1.1.38+ds1-1 all
  web interface for graphing of monitoring systems

ganglia-webfrontend/bionic 3.6.1-3 all
  cluster monitoring toolkit - web front-end

golang-github-unknwon-cae-dev/bionic 0.0~git20160715.0.c6aac99-4 all
  PHP-like Compression and Archive Extensions in Go

haserl/bionic 0.9.35-2 amd64
  CGI scripting program for embedded environments

kdevelop-php-docs/bionic 5.2.1-1ubuntu2 all
  transitional package for kdevelop-php

kdevelop-php-docs-l10n/bionic 5.2.1-1ubuntu2 all
  transitional package for kdevelop-php-l10n
…
:

To learn more about what each module does, you could search the internet for more information about them. Alternatively, look at the long description of the package by typing:

• apt show package_name

There will be a lot of output, with one field called Description which will have a longer explanation of the functionality that the module provides.

For example, to find out what the php-cli module does, you could type this:

• apt show php-cli

Along with a large amount of other information, you’ll find something that looks like this:

…
Description: command-line interpreter for the PHP scripting language (default)
 This package provides the /usr/bin/php command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Ubuntu's default
 PHP version (currently 7.2).
…

If, after researching, you decide you would like to install a package, you can do so by using the apt install command like you have been doing for the other software.

If you decided that php-cli is something that you need, you could type:

• sudo apt install php-cli

If you want to install more than one module, you can do that by listing each one, separated by a space, following the apt install command, like this:

• sudo apt install package1 package2 …

At this point, your LAMP stack is installed and configured. Before making any more changes or deploying an application, though, it would be helpful to proactively test out your PHP configuration in case there are any issues that should be addressed.

Step 4 — Testing PHP Processing on your Web Server

In order to test that your system is configured properly for PHP, create a very basic PHP script called info.php. In order for Apache to find this file and serve it correctly, it must be saved to a very specific directory, which is called the “web root”.

In Ubuntu 18.04, this directory is located at /var/www/html/. Create the file at that location by running:

• sudo nano /var/www/html/info.php

This will open a blank file. Add the following text, which is valid PHP code, inside the file:

<?php
phpinfo();
?>

When you are finished, save and close the file.

Now you can test whether your web server is able to correctly display content generated by this PHP script. To try this out, visit this page in your web browser. You’ll need your server’s public IP address again.

The address you will want to visit is:

http://your_server_ip/info.php

The page that you come to should look something like this:

This page provides some basic information about your server from the perspective of PHP. It is useful for debugging and to ensure that your settings are being applied correctly.

If you can see this page in your browser, then your PHP is working as expected.

You probably want to remove this file after this test because it could actually give information about your server to unauthorized users. To do this, run the following command:

• sudo rm /var/www/html/info.php

Source – https://www.digitalocean.com/community/tutorials/how-to-install-linux-apache-mysql-php-lamp-stack-ubuntu-18-04